Powermat slims down wireless charging for iPhone 4

The idea was that instead of plugging your phone into a charger, you could simply toss the phone onto a mat from the likes of Powermat or Pure Energy Solutions to charge it.

When wireless charging systems for smartphones and other gadgets first came on the scene a couple of years ago, they were cool in concept but rather clumsy in practice. The idea was that instead of plugging your phone into a charger, you could simply toss the phone onto a mat from the likes of Powermat or Pure Energy Solutions to charge it.

But in order to get the charge from the mat to the phone, you had to have a receiver on your phone -- and that meant putting on a bulky case or battery door that added significantly to the phone's heft. And if there wasn't a case or battery door available for your particular phone, you had to plug the phone into a universal receiver, which certainly isn't "wireless charging" in my book.

These limitations remain, but Powermat is fighting the bulk problem with a slimmed-down line of receiver cases and doors for half a dozen smartphones, including the iPhone 4, the BlackBerry Bold 9700 and the Android-based HTC Evo 4G.

I tested the new Powermat Wireless Charging System for iPhone 4, which includes a thin new receiver case and a charging pad that's just big enough for a single iPhone.

A less chunky case

Once you've wrestled it out of its packaging, the hard plastic iPhone 4 case slides onto the phone easily and snaps snugly into place, leaving appropriately placed holes for the camera lens, audio in/out jack, power button, mute switch, volume buttons and speakers. (Like other iPhone 4 cases, Powermat's receiver case fixes the phone's antenna problem.) Because the case plugs into and covers the iPhone's dock connector, it has a micro USB port for syncing the phone with a computer (a micro-USB-to-USB cable is included).

The receiver case measures 14mm at its thickest point, only about 2mm thicker than a typical iPhone 4 sleeve case. That's a significant improvement over Powermat's 18mm-thick receiver case for the iPhone 3G/3GS, but of course the iPhone 4 itself is more slender than the iPhone 3G. The earlier case also had an unsightly bulge at the back, while the new case has a flat back.

The new receiver case does, however, add about 4 oz. to the phone's weight and tacks on about 6mm to its height (when you're holding it in portrait orientation). Worse, the case's black plastic has a cheap look and feel to it that ruins the iPhone's high-class aesthetic. That seems like a silly quibble, but part of the appeal of a wireless charging system is that it looks cool; the case should too.

Charging up

Nevertheless, the system works as advertised, and it helps neaten up your workspace if, like me, you habitually charge your phone by plugging it into one of your computer's USB ports. The iPhone-size 1Xi charging pad takes up minimal desk space and plugs into an AC socket; I found it easy to keep that wire out of sight behind my desk on its way to the power outlet.

Unlike Powermat's other charging mats, which are flat on top and a bit larger than the devices they're meant to charge, the 1Xi pad is fitted exactly to the shape of the iPhone 4 receiver case, with a tall lip at each end. This means you can't just toss your iPhone onto it any which way as you can with other charging mats; it also means that smartphones other than the iPhone 4 won't fit right on the pad. But you can just set the encased iPhone 4 down, properly aligned, to begin charging.

A caveat: It's easy to place the phone the wrong way around on the charging pad -- the top of the phone has to be at the top of the charger (where its power cord connects) or else it won't charge. However, when you place the phone on the pad properly, it makes a distinctive sound to let you know a connection has been made and the device is charging. (A similar sound plays when you pick up the phone.) I quickly got used to listening for the sound to make sure I had placed the phone correctly.

In my tests, charging the phone from the 1Xi pad wasn't appreciably faster or slower than charging from the iPhone's outlet charger or from my computer via USB. When the phone's battery is fully charged, the pad automatically stops sending power to it.

The complete wireless charging system for the iPhone 4 costs $59.99. You can also buy just the iPhone 4 receiver case, which works with any Powermat charger, for $39.99.

Bottom line

To my way of thinking, $60 is a lot to pay just to save yourself the trouble of plugging in your phone. But it is undeniably convenient to just drop the phone onto the pad to charge. If you want to speed up your charging routine ever so slightly -- or you just can't bear the clutter of wires trailing across your desk or tabletop -- Powermat's kit will serve admirably. I just wish the case were more polished-looking.

Truly effortless wireless charging will come only when universal chargers are everywhere and receivers are built right into mobile devices. Until that day, charging mats and receiver cases are the next best thing, and Powermat's slim new iPhone 4 case is a step in the right direction.

Valerie Potter is a features editor at Computerworld.

Join the PC World newsletter!

Error: Please check your email address.

Tags consumer electronics

Our Back to Business guide highlights the best products for you to boost your productivity at home, on the road, at the office, or in the classroom.

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Valerie Potter

Computerworld (US)
Show Comments

Essentials

Microsoft L5V-00027 Sculpt Ergonomic Keyboard Desktop

Learn more >

Lexar® JumpDrive® S57 USB 3.0 flash drive

Learn more >

Mobile

Lexar® JumpDrive® S45 USB 3.0 flash drive 

Learn more >

Exec

Audio-Technica ATH-ANC70 Noise Cancelling Headphones

Learn more >

Lexar® Professional 1800x microSDHC™/microSDXC™ UHS-II cards 

Learn more >

Lexar® JumpDrive® C20c USB Type-C flash drive 

Learn more >

HD Pan/Tilt Wi-Fi Camera with Night Vision NC450

Learn more >

Budget

Back To Business Guide

Click for more ›

Most Popular Reviews

Latest News Articles

Resources

PCW Evaluation Team

Azadeh Williams

HP OfficeJet Pro 8730

A smarter way to print for busy small business owners, combining speedy printing with scanning and copying, making it easier to produce high quality documents and images at a touch of a button.

Andrew Grant

HP OfficeJet Pro 8730

I've had a multifunction printer in the office going on 10 years now. It was a neat bit of kit back in the day -- print, copy, scan, fax -- when printing over WiFi felt a bit like magic. It’s seen better days though and an upgrade’s well overdue. This HP OfficeJet Pro 8730 looks like it ticks all the same boxes: print, copy, scan, and fax. (Really? Does anyone fax anything any more? I guess it's good to know the facility’s there, just in case.) Printing over WiFi is more-or- less standard these days.

Ed Dawson

HP OfficeJet Pro 8730

As a freelance writer who is always on the go, I like my technology to be both efficient and effective so I can do my job well. The HP OfficeJet Pro 8730 Inkjet Printer ticks all the boxes in terms of form factor, performance and user interface.

Michael Hargreaves

Windows 10 for Business / Dell XPS 13

I’d happily recommend this touchscreen laptop and Windows 10 as a great way to get serious work done at a desk or on the road.

Aysha Strobbe

Windows 10 / HP Spectre x360

Ultimately, I think the Windows 10 environment is excellent for me as it caters for so many different uses. The inclusion of the Xbox app is also great for when you need some downtime too!

Mark Escubio

Windows 10 / Lenovo Yoga 910

For me, the Xbox Play Anywhere is a great new feature as it allows you to play your current Xbox games with higher resolutions and better graphics without forking out extra cash for another copy. Although available titles are still scarce, but I’m sure it will grow in time.

Featured Content

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?