Audio-Technica ATH-ANC9 noise cancelling headphones
These $349 headphones can cancel airplane, office or outside noise
- Excellent noise cancelling
- Clear treble and solid bass
- Good construction
- Bass and treble suffer when powered off
- Strong clamping force may cause fatigue
- Thin cable
Audio-Technica’s top noise cancelling headphones do an excellent job of blocking outside noise. They also sound musical and detailed, but this is only true when noise cancelling is activated -- with no battery boost they’re flat and lifeless.
Price$ 349.00 (AUD)
Audio-Technica is a headphone maker that doesn’t get as much publicity as Bose or Sony or Sennheiser. The Japanese company produces some extremely high quality products though, like its range of W series headphones finished in beautiful Japanese cherry and ebony woods.
It also has a variety of active noise cancelling headphones and earphones designed for travellers. The ATH-ANC9 is the latest and most distinguished iteration of Audio-Technica’s noise cancelling series.
Audio-Technica ATH-ANC9: Design
These headphones aren’t as classic-looking as Audio-Technica’s W series, and are finished in black and dark silver for a modern and professional look. The ear-cups are coated in soft-finish plastic, and the headband and ear-pads use a very soft black faux-leather and cushy padding.
The Audio-Technica ATH-ANC9 headphones use a closed-back design, which seals against the wearer’s head with a strong clamping force. We found that the headphones were quite tight and became slightly uncomfortable after an hour or so, requiring adjustment. It’s likely they’ll loosen up after a longer period of wear, though.
The head-band telescopes out with an extra 1.5in of distance on both the left and right sides, so the ATH-ANC9 can be adjusted to suit small-medium to extra-large heads. The minimum size would fit an average 10-year-old child’s head acceptably, by our estimation.
The left ear-cup is where all the action happens: as well as the headphone jack for the removeable cable, the switches and LED for the noise cancelling are easily accessible on the ear-cup’s face. The on-off switch is joined by a button which switches between the headphones’ three noise cancelling modes.
Audio-Technica ATH-ANC9: Accessories
The Audio-Technica ATH-ANC9 ships with a reasonably solid plastic hard-case, which is finished in velvet. Inside it there’s ample room for the headphones, which travel with the ear-cups twisted flat. The head-band of the headphones can be almost completely extended while in the hard-case, so you won’t have to adjust the headphones every time you store them away.
The ATH-ANC9 comes with two headphones cables, both of which are around 1.3 metres long. One has an in-line microphone, with a single multifunction button, that works on the Apple iPhone. You also get a AAA battery for the ATH-ANC9’s noise cancelling, an airplane adapter and a 6.5mm hi-fi stereo plug adapter.
Audio-Technica ATH-ANC9: Sound quality
The Audio-Technica ATH-ANC9 is a mixed bag in terms of sound quality. The headphones sound excellent with great detail and musicality once the noise cancelling amplification circuit is on, but with noise cancelling off the ANC9s lose a lot of their character.
With noise cancelling on, our comments are all positive. Treble detail is excellent, from low volume all the way to maximum — no distortion and no evidence of harshness. It’s not especially rich treble, but it’s very clear and flatters high quality music recordings. Bass is well controlled, with quick response and very little booming decay, although it’s not quite as prominent and powerful as on the Bose QuietComfort 15s or the Sony MDR-NC500D. Mid-range response is very slightly recessed compared to main bass and treble frequencies, giving the Audio-Technica ATH-ANC9 a lively, musical, house-music vibe. We like the sound the ATH-ANC9s produce on electronic music a lot, but they also handle more detailed and delicate classical and acoustic tracks with ease.
Turning the noise cancelling off changes the audio signature of the ATH-ANC9 completely. Treble becomes less prominent and less detailed, and bass recedes significantly. Mid-range is comparatively loud, giving the headphones a slightly bloated sound. The sound response is flatter than with noise cancelling enabled, but the loss of detail is evident. The headphones don’t sound awful, but we would use the ATH-ANC9 with the noise cancelling activated every time.
We listened to the headphones for over 30 hours before the bundled Energizer AAA alkaline battery failed — this is over a fortnight of listening to the headphones two hours a day, each way on a one hour commute to work. If you intend on using these headphones day-in, day-out we’d recommend buying a pair of rechargeable AAA cells and keeping one topped up while the other is in use.
Audio-Technica ATH-ANC9: Noise cancelling
The noise cancelling of the ATH-ANC9 headphones is excellent. It’s amongst the best active noise cancelling we’ve listened to, and the ability to pick and choose between three slightly varied presets is an added bonus.
The headphones have three noise cancelling modes. The Aircraft mode is self-explanatory: designed to be used during air travel, it lights the headphone’s LED up in green and cuts out 95% of 200Hz environmental noise. The Office mode cuts out 95% of the slightly-higher 300Hz frequency, making it better suited to the hum of air conditioners and copiers. The third mode, for Study use, cuts out only 85% of 200Hz noise, so it’s less intrusive than the Airplane setting.
We did the majority of our testing in a noisy office, with a constant low hum from air conditioning, a higher hum from a desk fan, and the usual bustle and murmur of office conversations. The noise cancelling of the ATH-ANC9’s Office mode worked near-perfectly. replacing the air conditioning and desk fan noise with a very minor higher frequency hiss. Conversations were less affected by the noise cancelling, but it did work to cut out some of the distraction.
The Airplane mode is more intrusive, with slightly more hiss audible but a larger cut on low frequencies. The ‘pressure’ feeling that noise cancelling causes on the wearer’s ears is most obvious in Airplane mode, but is still perfectly manageable. If you switch the noise cancelling off and on again the difference is obvious, but not unbearable.
The Study mode has the least audible hiss and still does an effective job of removing constant noises — if you’re in an already-quiet setting like a library or your own home, this is what we’d recommend. Both work very well though, and the difference between all three modes is minor.
We also tested the noise cancelling while walking down a quiet street, a few streets away from a busy Sydney main road. The ambient noise of traffic was almost entirely cut out by the Airplane mode, with Office and Study being slightly less effective. The noise cancelling isn’t adversely affected by walking or movement as long as the head-band is tight enough, although there is a very minor rattle from the noise cancelling switch if you shake your head.
Audio-Technica ATH-ANC9: Conclusion
The noise cancelling modes of the Audio-Technica ATH-ANC9 are all very well implemented, as is the ability to switch between all three at will. The headphones’ sound quality is also impressive when noise cancellation is enabled — less so when it isn’t — and the price tag is lower than a pair of Bose QuietComfort 15s.
Join the PC World newsletter!
Most Popular Reviews
- 1 Samsung Galaxy S8 phone: full, in-depth review
- 2 Ryzen 5 vs Intel Core i5 CPU Australian review
- 3 Mass Effect Andromeda review: One for the fans
- 4 LG G6 phone: full, in-depth review
- 5 Samsung Galaxy A5 2017 phone: Full, in-depth review
Latest News Articles
- Apple's AirPods could deliver audio with multiple wireless protocols
- First look: Nuheara IQbuds smart Bluetooth ear buds do more than just music
- Convoy International restructures business focus
- Beats Solo2 headphones go wireless for $399
- Astro A38 review: A staggering price to pay for convenience
PCW Evaluation Team
A smarter way to print for busy small business owners, combining speedy printing with scanning and copying, making it easier to produce high quality documents and images at a touch of a button.
I've had a multifunction printer in the office going on 10 years now. It was a neat bit of kit back in the day -- print, copy, scan, fax -- when printing over WiFi felt a bit like magic. It’s seen better days though and an upgrade’s well overdue. This HP OfficeJet Pro 8730 looks like it ticks all the same boxes: print, copy, scan, and fax. (Really? Does anyone fax anything any more? I guess it's good to know the facility’s there, just in case.) Printing over WiFi is more-or- less standard these days.
As a freelance writer who is always on the go, I like my technology to be both efficient and effective so I can do my job well. The HP OfficeJet Pro 8730 Inkjet Printer ticks all the boxes in terms of form factor, performance and user interface.
I’d happily recommend this touchscreen laptop and Windows 10 as a great way to get serious work done at a desk or on the road.
Ultimately, I think the Windows 10 environment is excellent for me as it caters for so many different uses. The inclusion of the Xbox app is also great for when you need some downtime too!
For me, the Xbox Play Anywhere is a great new feature as it allows you to play your current Xbox games with higher resolutions and better graphics without forking out extra cash for another copy. Although available titles are still scarce, but I’m sure it will grow in time.
- Samsung Galaxy S8 phone: full, in-depth review
- Ryzen 5 vs Intel Core i5 CPU Australian review
- Mass Effect Andromeda review: One for the fans
- What's the difference between an Intel Core i3, i5 and i7?
- Laser vs. inkjet printers: which is better?
- CCJava DeveloperACT
- FTICT Contract AnalystWA
- FTGeospatial Data AnalystVIC
- TPInfrastructure ArchitectQLD
- CCSAP CRM Functional AnalystACT
- FTHRIS Systems Support Analyst (Kronos)NSW
- FTSenior Software Engineer - JavaACT
- CCSolution ArchitectNSW
- FTAsst. Director - Claim Analysis. Work Location - CanberraNSW
- CCService Delivery Analyst - Port MacquarieNSW
- FTSAP APO ConsultantNSW
- FTBI and Report DeveloperQLD
- FTProduct Manager - IoTNSW
- FTData Entry Administrator - TelecommunicationsNSW
- FTFull Stack DeveloperQLD
- TPBusiness Intelligence DeveloperSA
- FTSales Lead / Sales Executive - Enterprise IT Healthcare Perm - North RydeNSW
- CCSharepoint DeveloperNSW
- TPBusiness AnalystNSW
- FTService Desk OperatorsSA
- FTERP Reporting AnalystNSW
- FTSecurity AnalystACT
- FTSenior Desktop Engineer - SCCM / AD / 2012 ServerNSW
- FTHealthcare Application Integration SupportQLD
- CCSystems Specialist - Network Systems l Port MacquarieQLD