- no duplex printing
- • • •
I agreed with Mick. Not a user friendly printer. Such a huge heavy printer and do not do duplex printing.
Been facing lots of problem with printing function (multiple errors). Very frustrating and disappointing!!
Fuji Xerox DocuPrint C1190FS colour laser multifunction
Fuji Xerox's DocuPrint C1190FS is a colour laser multifunction printer that will suit small offices
- Secure Print and Sample Print, user-upgradeable memory, easy navigation
- Expensive consumables, scan quality could be better
For an entry-level offering, the Fuji Xerox DocuPrint C1190FS multifunction provides good print quality at a consistent speed, though its consumables are slightly expensive.
Price$ 799.00 (AUD)
Buy now (Selling at 26 stores)
Fuji Xerox's DocuPrint C1190FS is an entry-level colour laser multifunction printer that's a surprisingly capable performer given its price tag. Its feature set isn't extravagant and the detail of scans could be improved, but this multifunction will be a valuable addition to any small office.
Unlike the Fuji Xerox Phaser 8560MFP which looks like a conventional multifunction, the DocuPrint C1190FS bears closer resemblance to the DocuPrint C2200, with a scanner and automatic document feeder teetering off one edge. The design makes the DocuPrint C1190FS a bit taller than it might be otherwise, but it makes pages easier to grab from the output tray.
Fuji Xerox has placed the imaging unit at the very front of the DocuPrint C1190FS multifunction, so paper input is limited to 250 sheets through the paper cassette and a single-page manual paper feeder. The increased space between the output tray and scanner doesn't offer any advantages either — the tray can only handle a maximum of 150 sheets at a time.
One annoyance we found with paper management is that the Fuji Xerox DocuPrint C1190FS refused to remember paper tray settings. Even when defaults were set in the system settings menu, the multifunction continued to ask for paper tray settings whenever the tray was opened, and refused to print until these settings were confirmed.
USB, Ethernet and fax RJ-11 ports are all available at the back of the printer, and toners can be easily replaced through a side panel. Though compact, the four individual toners are still capable of producing 3000 pages each. When taking the multifunction's other consumables into account, the DocuPrint C1190FS will cost you an average of 26.8c per A4 page, which is somewhat expensive for a laser printer.
The small monochrome LCD display is surprisingly effective, though mounting it at a different angle would have made it easier to read. You can print configuration reports directly from the printer, but the DocuPrint C1190FS also displays the assigned IP address on the display to save you from wasting paper.
Automatic duplexing is absent but it's difficult to complain considering the multifunction's price.
In addition to normal printing, you can select Secure Print, which holds the document until a PIN code is entered, and Sample Print, which allows you to save the print job into the memory for later duplication. The printer comes with 384MB of memory, which is user-upgradeable.
The Web interface provides consumable and maintenance information, and it is easy to navigate. There is no 802.1X authentication function, but Fuji Xerox has provided an IP filter which allows you to limit the printer's network availability to five users.
The Fuji Xerox DocuPrint C1190FS prints consistently at 16.5 pages per minute for mono documents and 12.2ppm for colour documents, regardless of the quality setting. It takes an average of 21sec for the first page to print. These speeds are quite slow for a laser printer.
Print quality is good. The laser printer capably handles text at font sizes ranging from 7pt to 22pt, producing accurate and readable characters without aberrations. Colour documents are quite accurate and there is no evidence of the colour mis-registration we found with the DocuPrint C3300DX. Blues can have a slightly purple hue and don't mix well with black text, but otherwise the colour palette is certainly acceptable for professional documents and graphics.
The maximum 600dpi optical scanning resolution results in sketchy detail on scanned images. Though it will suffice for straight text, we would have preferred slightly better resolution for image scanning.
- No Scanner interface with Mac
- • • •
Not a very user friendly printer, no software supplied with printer for interface with scanner.
Browser setup for scanner very difficult to use, no much information instruction supplied how to setup (unless you can read Japanese) anything.
Very disappointing printer for the everyday user.
Latest News Articles
- Google invites Glass wearers to brave LA's beaches
- Telerik frees HTML5 collection of components
- Space X rocket en route to ISS with space laser cargo
- AMD steers clear of low-cost tablet market
- Experts: Avoid big mistakes with Oracle's Exadata
Most Popular Articles
- 1 Top 5 reasons to hate the Samsung Galaxy S5
- 2 What's the difference between an Intel Core i3, i5 and i7?
- 3 Windows 7 Home Premium vs. Windows 7 Professional
- 4 Laser vs. inkjet printers: which is better?
- 5 Five flaws in Samsung Galaxy S5's TouchWiz
GGG Evaluation Team
First impression on unpacking the Q702 test unit was the solid feel and clean, minimalist styling.
For work use, Microsoft Word and Excel programs pre-installed on the device are adequate for preparing short documents.
The Fujitsu LifeBook UH574 allowed for great mobility without being obnoxiously heavy or clunky. Its twelve hours of battery life did not disappoint.
The screen was particularly good. It is bright and visible from most angles, however heat is an issue, particularly around the Windows button on the front, and on the back where the battery housing is located.
My first impression after unboxing the Q702 is that it is a nice looking unit. Styling is somewhat minimalist but very effective. The tablet part, once detached, has a nice weight, and no buttons or switches are located in awkward or intrusive positions.