- Anti-Glare screen, Low weight, Brightness
- Audio out location, Volume control, Power supply is not integrated.
- • • •
The PCWORLD review is right about the PROS and CONS of this monitor.
Some people could use a DVI-D port.
The only problem I've found is the volume control. You have to navigate through the menu; no immediate way of controlling this.
In general, I would say is a very good device suitable to do the task it was designed for.
ViewSonic VX2753mh-LED monitor
A 27in LED monitor with a fast refresh rate and good contrast
The ViewSonic VX2753mh-LED is a 27in LED edge-lit computer monitor with a recommended retail price of $599. This price puts it on par with similarly sized monitors from ASUS, Acer and Samsung, but the ViewSonic VX2753mh-LED claims a response time of 1ms, halving the best efforts of its competitors.
- Good colour accuracy in sRGB and 6500K modes
- Reasonable static contrast
- Good handling of fast motion
- Dynamic contrast dims screen, removes brightness controls
- Bezel is thick at the base
- Speakers have a high minimum volume
ViewSonic's 27in VX2753mh-LED is a 1080p computer monitor with two HDMI inputs. It's got a good picture for a reasonably cheap panel, and its flaws aren't particularly bad. We'd consider it if we wanted to buy a large computer monitor.
Where to buy
Priced from: $ 259.00Selling at 2 stores
ViewSonic VX2753mh-LED: Design and connectivity
The ViewSonic VX2753mh-LED monitor encases its 27in Full HD 1920x1080pixel screen in a glossy black bezel. it’s thin on the top and sides but thickens at the base to conceal a pair of speakers. The finish is a little tacky and the design isn’t the most fashionable on the market (we’d look to Samsung for that), but we do like the thin aspect of the monitor. The screen is less than an inch thick at its edges and bulges to around two inches thick at the centre rear of the panel.
The VX2753mh-LED has two HDMI ports and an analog VGA connector for older devices. In addition there’s a 3.5mm headphone port for the audio that’s fed in via HDMI, and a 3.5mm analog audio input jack to accompany the VGA. Unless you have a strange, pressing need for component video we’d say the ViewSonic VX2753mh-LED monitor has a pretty comprehensive connectivity setup.
The on-screen interface of the ViewSonic VX2753mh-LED is navigated using four side-mounted buttons below the power button. These buttons also switch between video inputs when needed. The interface is simple, but has access to all the basic functions you’d expect — you can change brightness, contrast, colour temperature (through presets or a custom setting), and delve into more complicated features.
ViewSonic VX2753mh-LED: Picture quality and audio quality
The 27in 1080p panel of the ViewSonic VX2753mh-LED is impressive. It’s a matte finish and doesn’t pick up any annoying light reflections, making it an excellent choice for a bright room. Detail levels from the 1080p panel are generally good. The screen’s not too sharp in its default settings, and Blu-ray video looks good without being grainy or too well-defined.
We opted to keep the dynamic contrast setting turned off, purely because of the negative effects it had on overall screen brightness. Black levels were excellent with the dynamic contrast mode enabled, with deep and detailed shadowS, but highlights weren’t nearly as bright as we were hoping.
With dynamic contrast disabled and the brightness and contrast settings adjusted to suit the viewing environment — in a bright, fluorescent-lit room we opted for brightness at 35 and contrast at 65 — a much better compromise between black levels and highlights is possible. We thought the picture that the ViewSonic VX2753mh-LED monitor displayed was well saturated in both the 6500K daylight and sRBG presets, and we didn’t find a need to delve into custom colour settings.
There are three settings for the screen’s response rate — Standard, Advanced and Ultra Fast. We ran through a few Blu-ray movies, plenty of Web browSing and a bit of Xbox 360 gaming using the Ultra Fast setting and found it generally pretty good. There was no visible ghosting, and video was smooth and flicker-free. Gaming was excellent with no lag between inputs and on-screen movements.
Audio from the ViewSonic VX2753mh-LED’s inbuilt stereo speakers is clear, if a little tinny. There’s no bass to speak of but dialogue is clear, and our movie-watching sessions weren’t particularly painful. Volume is controlled through the side-mounted buttons but there’s no easy access — you need to navigate through a few menu settings each time.
The speakers of the ViewSonic VX2753mh-LED have a reasonably high minimum volume — that is, when the volume is set to its minimum increment of 1 out of 100, the speakers are still quite loud. There’s little difference between volume levels at the 1 and 20 settings, so you’ll need to control the volume on your PC rather than the monitor itself. Anyone using the ViewSonic VX2753mh-LED with a Blu-ray player (or other device without an inbuilt volume control) is out of luck.
ViewSonic VX2753mh-LED monitor: Conclusion
The ViewSonic VX2753mh-LED does a good job of displaying Full HD content. It’s also reasonably well priced — we saw it at one online store for $449 — and is thin and light. The design could be a little more fashionable and the speakers could be more versatile, but otherwise the VX2753mh-LED handles the responsibilities of a large-screen computer monitor well.
- Response time, size and affordability....
- Nothing yet.
- • • •
This obviously isn't a user review, but I've had my eye on this particular monitor for quite some time and 95% of the reviews I've come across said this was a decent and affordable unit, boasting above average quality. I have a PS3 and play on an older 37" LG-LCD and struggle with horrendous amount of "delay or lag" with the response between my controller and movements within the game. Is this a good choice for a beginners gaming setup?
Best Deals on PCWorld
- MonitorsView all »
- Desktop PCsView all »
- NotebooksView all »
- Home EntertainmentView all »
- Digital VideoView all »