Via's twin-core processor may upstage AMD, Intel

In a move that could upstage the dual-core processor plans of Advanced Micro Devices (AMD) and Intel, Via Technologies is developing a twin-core x86 processor that is likely to hit the market by June 2005, a company executive confirmed Tuesday.

A launch in June would give Via a shot at being the first company to introduce an x86 processor with two cores.

"We're pretty confident we'll have something by the end of Q2 next year," said Richard Brown, Via's associate vice president of marketing, in Taipei.

The twin-core processor is primarily designed to be used in high-density server clusters. Via has demonstrated that two processors can fit onto a small Mini-ITX motherboard and it will be feasible for customers to offer a standard 1U server chassis containing two Mini-ITX motherboards running four twin-core processors, Brown said.

Via's twin-core processor contains two pieces of silicon -- each with one Esther processor core on it -- inside a single chip package, Brown said. By comparison, dual-core processors, which are being developed by AMD and Intel, put two cores on a single piece of silicon. Via also has plans to offer a dual-core chip, but that product is not expected to be available any time soon.

Announced in May, the Esther cores are manufactured by IBM using a 90 nanometer process. The 32 bit chips consume 3.5 watts when running at a clock speed of 1GHz and will run at a clock speed of up to 2GHz. Esther also incorporates Via's PadLock security technology that offers hardware-accelerated RSA encryption and support for NX (execution protection) antivirus technology.

Via has not finalized the clock speed of the cores that will be used in the twin-core chips, Brown said.

Putting two cores, each on a separate piece of silicon, inside of a single package is not a simple endeavor and Via is currently working through issues such as heat and interference that must be resolved for the chip to work properly, Brown said. However, Via is confident these issues will be resolved, he said, noting that the dual-core approach presents its own set of challenges.

One of those challenges is production yield, Brown said. With two cores on each silicon chip, there is a greater chance that something can go wrong and the chips will not meet the required performance specifications.

Via chose the twin-core design because it will allow the company to more quickly bring to market a processor with two cores, Brown said. The company doesn't believe that a significant performance difference currently exists between the two approaches, he said.

This is likely true for the types of applications that Via plans to target with the twin-core processor, said Nathan Brookwood, principal analyst with Insight 64. Via does not have the contacts within the U.S. and European business communities that Intel has long held and that AMD is starting to develop, and will focus on bringing this product to low-end servers in Asia and the market for embedded products, Brookwood said.

"Via's in a whole different world as far as who it is selling to, there's not a lot of overlap," Brookwood said.

Pricing for the chip has not yet been set. "The pricing will be affordable but we're not going to go ultra low cost," Brown said.

Intel and AMD have committed to releasing dual-core processors in 2005. Transmeta, the only other significant vendor of x86 processors, has said that it is skeptical about the benefits of a dual-core chip within its low-power niche market and does not have a dual-core chip on its road map.

AMD is targeting the middle of next year for its dual-core Opteron chip, which it has already demonstrated in an existing Hewlett-Packard server. Intel has said it will release dual-core chips for its desktop, notebook, and high-end server product groups by the end of 2005. It intends to release a dual-core processor for low-end servers in 2006.

(Tom Krazit contributed to this report.)

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Sumner Lemon

IDG News Service
Show Comments

Cool Tech

Breitling Superocean Heritage Chronographe 44

Learn more >

SanDisk MicroSDXC™ for Nintendo® Switch™

Learn more >

Toys for Boys

Family Friendly

Panasonic 4K UHD Blu-Ray Player and Full HD Recorder with Netflix - UBT1GL-K

Learn more >

Stocking Stuffer

Razer DeathAdder Expert Ergonomic Gaming Mouse

Learn more >

Christmas Gift Guide

Click for more ›

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?