Media releases are provided as is by companies and have not been edited or checked for accuracy. Any queries should be directed to the company itself.

EPSON Announces Advanced Model of the World's Lightest Micro-Flying Robot

  • 20 August, 2004 15:31

<p>EPSON today announced that it has successfully developed a lighter and more advanced successor to the microFR, the world's smallest and lightest micro-flying robot.</p>
<p>Turning once again to its micromechatronics technology, EPSON has redefined the state of the art with its microFR II micro-flying robot-the world's new lightest and most advanced microrobot*1, which also features Bluetooth wireless control and independent flight*2. The microFR II will be on display at the Emerging Technology Fair, part of the Future Creation Fair that runs from August 27 to 30 at the Tokyo International Forum.</p>
<p>EPSON has long been engaged in the research and development of microrobots and in the development of applications for their enabling technologies. The microFR II is only the latest chapter in an EPSON success story that began with Monsieur, a microrobot that was listed in the Guinness Book of Records as the world's smallest microrobot and was put on sale in 1993.</p>
<p>Having made micromechatronics one of its core technologies, the company has since created and marketed several more microrobots in the EMRoS series*3. April 2003 saw the introduction of the Monsieur II-P <http:>, a prototype microrobot that operates on the world's thinnest microactuator (an ultra-thin, ultrasonic motor)*4 and is remote-controllable via a power-saving Bluetooth module.</http:></p>
<p>The following November, EPSON unveiled the prototype micro-flying robot <http:> microFR, which featured two ultra-thin, ultrasonic motors driving two contra-rotating propellers for levitation, plus the world's first*5 linear actuator stabilizing mechanism for attitude control during flight.</http:></p>
<p>However, the microFR prototype microrobot's flying range was limited by the length of the power cord attaching it to an external battery, and although it was radio-controlled, it had to be kept within sight of the operator while flying. Consequently, EPSON decided that the next step was to extend the flying range by developing fully wireless operation paired with independent flight capability.</p>
<p>The main issue to be tackled with regard to wireless flight was the need to combine lighter weight with greater dynamic lift. EPSON made the robot lighter by developing a new gyro-sensor that is a mere one-fifth the weight of its predecessor, making it the world's smallest and lightest*6 gyro-sensor <http:>. Also helping to shed weight is the high-density mounting technology used to package the microrobot's two microcontrollers including the EPSON-original S1C33-family 32-bit RISC.</http:></p>
<p>Dynamic lift was boosted 30% by introducing more powerful ultra-thin ultrasonic motors and newly designed optimally shaped main rotors. As for the challenge of independent flight, EPSON brought its many years of micromechatronics experience to bear in realising the development of a linear actuator with faster response time and a high-precision attitude control mechanism, and a flight path control and independent flight system (primarily for hovering).</p>
<p>To top it off, EPSON added an image sensor unit that can capture and transmit aerial images via a Bluetooth wireless connection to a monitor on land, and they also devised two LED lamps that can be controlled as a means of signaling. EPSON was assisted by Chiba University's Nonami (Control and Robotics) Laboratory in developing the control system for independent flight. The company also received advice on the rotor design from the Kawachi (Aeronautics and Astronautics) Laboratory at the University of Tokyo.</p>
<p>The key concept behind EPSON's R&amp;D efforts in micro-flying robots has been to expand the horizons of microrobot activities from two-dimensional space to three-dimensional space. Now, with the successful implementation of Bluetooth communications and independent flight in the microFR II, EPSON has literally added a new dimension to microrobotics while greatly expanding the potential range of microrobot applications by incorporating image capture and transmission functions.</p>
<p>At the Emerging Technology Fair, the microFR II micro-flying robot's features are expected to be showcased in artistic aerial performances. EPSON hopes to gain feedback from visitors at this exhibit that may be useful as the company strives toward further progress in developing original micromechatronics technologies and applications.</p>
<p>*1: Weight excluding battery, according to EPSON's research
*2: Independent flight is the ability to follow a computer-programmed flight path
*3: "EMRoS" stands for "EPSON MicroRobot System." This series included four main models: Monsieur (listed in the Guinness book of Records as the world's smallest-only 1cm3 in volume, 1993), followed by Nino (a 0.5-cm3 model introduced in 1994), Ricordo (1cm3, equipped with a recording and playback function, 1995), and Rubie (1 cm3, equipped with a capricious wandering function, 1995.) All of these models are independent traveling robots that chase a light source. Sales of the EMRoS series have been discontinued.
*4, 5, 6: According to EPSON's research</p>
<p>To view a video of the microFR II micro-flying robot, visit: <http:></http:></p>
<p>For further information please contact Bob Pritchard at CommunEcom Strategic Communications on 02 9949 9788 or 0413 825 552 or via email at</p>
<p>-ENDS -</p>
<p>About EPSON Australia</p>
<p>EPSON offers an extensive array of award winning image capture and image output products for the consumer, business, photography and graphic arts markets, and is also a leading supplier of value-added point-of-sale (POS) solutions for the retail market. EPSON is the market leader worldwide in sales of data projectors [DTC Consulting Limited figures]. EPSON's products meet consumer and business customer needs for superior quality colour image reproduction (printers), projection (projectors) and capture (scanners) devices with high-level functionality, compactness, systems integration and energy efficiency. EPSON Australia, founded in 1983 is headquartered in North Ryde NSW and is a subsidiary of the EPSON Group headquartered in Japan.</p>
<p>About The EPSON Group</p>
<p>The Epson Group increases its corporate value through its innovative and creative culture. Dedicated to providing its customers with digital image innovation, its main product lines comprise information-related equipment such as printers and projectors, electronic devices including displays, liquid crystal panels for projectors, semiconductors and quartz devices, and precision products such as watches. Epson products are known throughout the world for their superior quality, functionality, compactness and energy efficiency. The Epson Group is a network of 84,899 employees in 110 companies around the world, and is proud of its ongoing contributions to the global environment and to the communities in which it is located. Led by the Japan-based Seiko Epson Corp., which is listed on the First Section of the Tokyo Stock Exchange, the Group had consolidated sales of 1,413 billion yen in fiscal 2003.</p>

Most Popular Reviews

Join the newsletter!


Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.

Latest Articles


PCW Evaluation Team

Cate Bacon

Aruba Instant On AP11D

The strength of the Aruba Instant On AP11D is that the design and feature set support the modern, flexible, and mobile way of working.

Dr Prabigya Shiwakoti

Aruba Instant On AP11D

Aruba backs the AP11D up with a two-year warranty and 24/7 phone support.

Tom Pope

Dynabook Portégé X30L-G

Ultimately this laptop has achieved everything I would hope for in a laptop for work, while fitting that into a form factor and weight that is remarkable.

Tom Sellers


This smart laptop was enjoyable to use and great to work on – creating content was super simple.

Lolita Wang


It really doesn’t get more “gaming laptop” than this.

Featured Content

Product Launch Showcase

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?