Wireless USB group finishes 1.0 specification

The Wireless USB Promoter Group has completed the Wireless USB 1.0 specification.

A cable-free version of USB (Universal Serial Bus) took a big step forward on Tuesday with the completion of the Wireless USB 1.0 specification, but there is still some work to be done and questions remain about its prospects for widespread adoption.

The specification was created by the Wireless USB Promoter Group, a league of seven vendors that includes the heavyweights of the PC universe: Intel and Microsoft. The group has now handed over management of the standard to the USB Implementers Forum (USB-IF), the governing body for all USB specifications, said Jeff Ravencraft, chairman and president of the Wireless USB Promoter Group. Testing for compliance and interoperability should begin by the end of this quarter in a lab being set up at Intel, he said. The group is aiming for the plug-and-play simplicity of the current wired USB and will certify all products for interoperability before it allows a Wireless USB logo on the packaging, he said.

However, the promoter group is still working out a procedure for introducing two Wireless USB devices for the first time, called "association." Testing for that element of the technology should begin in the third quarter, and the first fully certified products should hit the market late this year, he said.

Wireless USB is intended as a high-speed cable replacement for connections between PCs and consumer electronics devices, or from one device to another. It is based on UWB (ultrawideband), a high-speed, short-range technology that allows Wireless USB to match the speed of wired USB 2.0, achieving 480M bps (bits per second) at 3 meters. However, standardization of UWB in the Institute of Electrical and Electronics Engineers Inc. (IEEE) is stalled, with two opposing camps meanwhile going forward with incompatible approaches. Wireless USB is based on technology backed by one of those parties, the WiMedia Alliance, of which Intel is a key member. In addition, UWB has not been approved for use by most regulatory bodies outside the U.S. because of concerns over possible interference with other wireless technologies.

Those factors cloud Wireless USB's prospects for reaching the economies of scale that will bring down costs, according to ABI Research analyst Dan Benjamin. Meanwhile, Bluetooth has gained some footing as a wireless cable replacement over the past several years and may get its own speed boost using UWB, and there is a wireless form of the IEEE 1394 interconnect standard in development, Benjamin said.

Ravencraft stands by Wireless USB's embrace of WiMedia.

"There doesn't seem to be any light at the end of the tunnel on the deadlock in the IEEE," Ravencraft said. "At some point you have to make a decision and go with it. We've done that," he added.

As for reaching low costs through economies of scale, Ravencraft is confident the U.S. is big enough to create a mass market on its own and success here will lead to acceptance elsewhere.

"When the rest of the world sees the productivity, and the revenue streams, and the employment numbers, they're going to say, 'Hey, why aren't we doing that, again?'" Ravencraft said.

Wireless USB does have backing from big names. In addition to Intel and Microsoft, the Wireless USB Promoter Group includes Hewlett-Packard, Agere Systems, NEC, Koninklijke Philips Electronics' semiconductor division and Samsung Electronics.

There is a real demand for a high-speed cable replacement technology for some uses, ABI's Benjamin said. For example, the best way to keep a handheld digital camcorder connected to a PC would be wirelessly, without a cable to get in the way, he pointed out. But streaming the video signal would take a lot of bandwidth.

"We don't really have a way to do wireless communication at this level of speed," he said.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Stephen Lawson

IDG News Service
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?