Nortel plans wireless product line

Nortel will launch 802.11n wireless LAN products in 2008

Nortel plans to deliver its own set of 802.11n wireless LAN products later in 2008, as part of a strategy to package a range of data and voice products to create wholly wireless office environments.

The company claimed it would pump a "significant increase" into R&D to design and build new multi-radio access points, and a new line of WLAN switches, though it did not specify how much new investment it would make. At the same time, Nortel said it will create integrated Ethernet switches to replace its dedicated wireless switches with a switch family that can handle both wired and wireless client traffic.

The decision is a blow to Trapeze Networks, which has been Nortel's wireless equipment supplier for several years. Nortel rebrands the Trapeze access points and switches, which enterprise customers deploy as an overlay network, with its own infrastructure, security and management separate from the wired network. Nortel said it will continue to OEM the Trapeze product until Nortel's products are available.

Nortel's new wireless products won't begin to appear until the latter half of 2008, the timing and the technologies make sense, says Chris Silva, analyst for enterprise wireless, Forrester Research. The draft IEEE 802.11n standard, which promises WLAN performance of 100M to 200Mbps initially, is going to level the WLAN playing field all over again, he says. Vendors will soon start delivering enterprise wireless gear based on draft 2 of the 802.11n standard, with the market for current gear shriveling in proportion.

"No one has a lock on the 11n market at this point," Silva says.

That being the case, Nortel's decision to take control of its WLAN future makes "good strategic sense," he says. "Nortel was buying someone else's technology and had no control over that development."

Currently, Nortel offers the 2300 series of WLAN access points and controllers from Trapeze, it's own outdoor WLAN mesh nodes, and both fixed and mobile WiMAX radios, targeted at backhaul and longer-range mobile networking.

Nortel will design and introduce a multi-radio 802.11a/b/g/n access point, and the accompanying controllers, says Kyle Klassen, director of enterprise wireless marketing, for Nortel's enterprise converged data networking group.

At the same time, software engineers will be working to integrate the management and security of these new products with Nortel's existing offerings, so that enterprise customers will have a single interface from which to oversee and secure both wired and wireless nets, Klassen says.

The next step for this continued integration will be to create truly unified Ethernet switches that can handle both wired and wireless access. To do so, Nor tell will take advantage of new silicon, possibly from chipmakers such as SiNett, and software, possibly from a vendor like NextHop.

Nortel may be able to exploit this product line in some unique ways. The company has been active in contributing technology to the WiMAX standard. It can marry 802.11n-based WLANs at multiple enterprise sites, with wider-area deployments over WiMAX links, and interconnect with municipal or other Wi-Fi mesh networks. The result could be a seamless and continuous connection between users with mobile voice and data devices and their corporate networks, Silva says. "Only Motorola [with its recent acquisition of WLAN vendor Symbol] and Nortel have this capability, and potentially Cisco," he says.

An example of what might be possible was demonstrated earlier this year at Nortel's Interop booth: using equipment implementing the IEEE 802.21 standard, Nortel and several partners showed mobile devices and their data applications being handed off seamlessly between WLAN, wired Ethernet and WiMAX networks, without interrupting sessions or having to relog onto the network, according to Klassen.

To do this, he says, new software has to be added to both client devices and to infrastructure gear such as radios and controllers. "This [handoff] takes place at a lower layer of the [software] stack, which means not just voice but also all my other applications can take advantage of this automatically."

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

John Cox

Network World
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?