Media releases are provided as is by companies and have not been edited or checked for accuracy. Any queries should be directed to the company itself.

Serial ATA Milestones Achieved With Two Completed Specs

  • 21 April, 2004 12:15

<p>SERIAL ATA MILESTONES ACHIEVED WITH TWO COMPLETED SPECS</p>
<p>Signaling Speed Doubled to 3Gbps, New Cable and Connector Solutions Defined</p>
<p>INTEL DEVELOPER FORUM, Barcelona, Spain, 21st April, 2004 – The Serial ATA Working Group announced today two specification development milestones at the Intel Developer Forum here. One centres on doubling the signaling speed for Serial ATA, the other on new cable and connector solutions to support additional applications and usage models.</p>
<p>The specification for the second generation Serial ATA signaling speed – 3Gbps – has been completed and the release candidate of that specification has started its ratification process. The second-generation speed of 3Gbps (300MB/s) is double that of the first-generation Serial ATA speed which is 1.5Gbps (150MB/s).</p>
<p>A selection of Serial ATA products supporting 3Gbps signaling speeds have already been announced. Once the ratification process is complete in about 30 days, those products that comply with the spec can be marketed as 3Gbps Serial ATA products.</p>
<p>Among the features of the enhanced technology is that no new cables and connectors are required to support the higher signaling speeds.</p>
<p>In addition to doubling the speed for the internal phy originally defined in the SATA 1.0 specification, the new phy specification also defines a higher-power version of it for longer-haul external datacentre use. The external phy version defined in the specification only impacts box-to-box applications (not used as a direct disk drive connection) and has been defined to match the electrical parameters for the SAS phy.</p>
<p>Also announced at IDF was that Volume 2 of the cables and connectors specification defining new cable and connector variants has been completed and the release candidate of that specification has started its ratification process.</p>
<p>Volume 2 of the cables and connectors specification adds several new cabling options:
• An internal multi-lane cable and connector assembly for streamlining connections between multiple internal host ports and internal devices or short backplane.
• An external consumer cable and connector solution that accommodates use of Serial ATA with external storage devices.
• External multi-lane datacentre cable and connector solution for connecting multiple Serial ATA channels between chassis in a datacentre.</p>
<p>Products based on the new cable and connector ingredients are expected to appear by the end of the year.</p>
<p>In a clear indication of strong industry adoption of Serial ATA, a plugfest last month saw participation from a record 200-plus representatives from 57 companies. During the two and a half day event in Colorado, 673 interoperability engagements were executed. The plugfest, sponsored by PMC Sierra, Marvel and Silicon Image, was free of charge to both Serial ATA Working Group members and non-members.</p>
<p>About the Serial ATA Working Group
The Serial ATA Working Group comprises the Serial ATA 1.0 Working Group and the Serial ATA II Working Group. The former organisation was established in February 2000 to specify Serial ATA for desktop applications. Membership is at 153 member companies, and includes promoter group companies Dell, Intel Corporation, Maxtor, Seagate and Vitesse. The Serial ATA II Working Group was formed in February 2002 to further address the needs of the storage industry with additional features and capabilities, and specify next generation transfer speeds. Visit www.serialata.org for more information.</p>
<p>About Intel
Intel, the world's largest chip maker, is also a leading manufacturer of computer, networking and communications products. Additional information about Intel is available at www.intel.com/pressroom</p>
<p>-ENDS-</p>
<p>Intel, XScale, MMX technology, Wireless MMX Technology, Wireless Intel SpeedSteep and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries</p>
<p>* Other names and brands may be claimed as the property of others.</p>
<p>For more information, please contact:
Eva Diaz or Debbie Sassine
Spectrum Communications
Tel: (02) 9954 3299
Email: evad@spectrumcomms.com.au or
debbies@spectrumcomms.com.au</p>

Most Popular

Most Popular Reviews

Join the newsletter!

Error: Please check your email address.

Latest Articles

Resources

PCW Evaluation Team

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Matthew Stivala

HP OfficeJet 250 Mobile Printer

The HP OfficeJet 250 Mobile Printer is a great device that fits perfectly into my fast paced and mobile lifestyle. My first impression of the printer itself was how incredibly compact and sleek the device was.

Featured Content

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?