Revitalizing an aging notebook on the cheap

All it takes is a couple hours and about $125 to breathe new life into an old laptop.

My ThinkPad R50 just hit its fifth birthday, and the years haven't been kind to it. When it was new, the notebook was reliable and fast, and it travelled with me to many places throughout the world.

Today, it's slow and prone to annoying shutdowns. Plus, it has a broken key, its fan sounds like a 747 taking off, and the case looks like it went five rounds with Lenox Lewis. It can all be fixed, but is it a good investment to revamp a notebook that's worth about US$350?

It sure is, because I'm going to give this old notebook a new lease on life for about US$125 -- a bargain, considering what it would cost to replace.

I'll show you how I cleaned it up, replaced its slow and overloaded hard drive, installed extra memory, replaced the keyboard, and gave it a software tune up. Not one of these tasks took me more than 15 minutes to do; altogether they took around an hour.

While it's all about reviving my ThinkPad R50, these techniques will work on just about any laptop. You'll need to investigate where the RAM is stashed, what kind of hard drive it uses and how the keyboard is attached. If you haven't backed up your data or defragged your hard drive lately, it could take you two or three hours longer than it took me, but it's absolutely worth the time you'll put into it.

When I finished my notebook rejuvenation, I benchmarked the system using FutureMark's PCMark 05 tests to see how much extra performance I squeezed out of the old notebook. Turns out my little project yielded a very stable ThinkPad that performs 30 per cent better than when I started. Here's how I did it.

Step 1: Add memory

One of the quickest, easiest and least expensive ways to improve a notebook's performance and reliability is to put in more system memory. Five years ago, the 256MB of RAM that came soldered to the motherboard was sufficient. Today, with operating system updates and more demanding applications, it's a drop in the bucket. Figure that it will take about five minutes to add memory.

My ThinkPad has one slot for adding memory and uses PC2700 SODIMM modules. I put in a 512MB module that cost about US$30, tripling the amount of system memory to 768MB. (I used Infineon memory, but any brand would have worked.) I could have added a 1GB module, but at US$75, it would have eaten up most of my budget and wouldn't have given me much more computing power.

How to do it

Ironically, the first step in this hardware project involves getting and loading the CPU-Z utility. Among other things, this nifty program shows how much memory is installed and its key specs.

Go to the Memory tab, and write down the frequency and other information that's listed; we'll need it later.

Next, shut off the system, remove the battery and find the trapdoor underneath the system where the RAM is hidden. It'll probably have a logo that looks like a circuit board.

After unscrewing and removing the cover, slide the new module into the slot, making sure that the gap in the board lines up with the plastic divider.

If it doesn't fit, don't force it. Try wiggling it a little or angling it in.

Once the module is seated, snap it down, locking the board into place. The eraser end of a pencil is the perfect tool to use to make sure nothing delicate breaks.

Finally, start the system up and run CPU-Z to make sure that the new memory specs match the original specs; the only number that should change is Size, which should now read 768MB. Now, sit back and enjoy the extra performance.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Brian Nadel

Show Comments

Brand Post

Most Popular Reviews

Latest Articles


PCW Evaluation Team

Andrew Teoh

Brother MFC-L9570CDW Multifunction Printer

Touch screen visibility and operation was great and easy to navigate. Each menu and sub-menu was in an understandable order and category

Louise Coady

Brother MFC-L9570CDW Multifunction Printer

The printer was convenient, produced clear and vibrant images and was very easy to use

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?