How to photograph fireworks

Equipped with these tips -- and one of these cameras -- you can take stunning photos of fireworks.

Summertime evokes timeless images of fire hydrants spraying water into the air, ice cream trucks rumbling down neighbourhood streets...and Fourth of July fireworks illuminating the night sky (if you're in the right country...). This year, you can capture a slice of summer forever with your digital camera by photographing a fireworks display.

It's not hard to do: Equipped with a few photo tips and the right camera, you can take amazing fireworks of your own.

Fireworks Photography Basics

147633-fireworks_2_b

The secret behind capturing fireworks: Use a slow shutter speed, so you can record those dramatic, colorful light trails as they explode through the sky. That also means you'll need some sort of camera support to capture a steady, unblurred shot.

The best way to stabilize your camera is with a tripod, where it can sit motionless through a long exposure. In a pinch, though, you can always try to brace yourself against a tree or a building, or hold the camera atop a monopod or walking stick.

If you have a digital SLR, here's another trick to avoid camera motion: Consider buying a shutter release cable (usually a $50-to-$70 option); this will allow you to snap a photo without physically touching the camera.

If your point-and-shoot or advanced point-and-shoot camera has a fireworks mode, go ahead and enable it--it will automatically adjust the camera's various settings for long-exposure night photography.

For the most part, I find that the preset fireworks mode achieves good results--it turns the flash to off, sets autofocus to infinity and exposure compensation to off, bumps down the shutter speed and aperture, and lowers the ISO.

Advanced photographers are better off going with long manual exposures for more creative control.

Some point-and-shoots may lack a fireworks-specific mode, but may still allow you to manually adjust the settings. (Most digital SLRs lack a preset fireworks mode entirely.) In those cases, set the camera to its lowest ISO setting, which will minimize the camera's tendency to generate distracting digital noise during the long exposure.

You should also turn off automatic focus and set the camera's focus to infinity, so it doesn't search helplessly for a subject in the dark when you're trying to start the exposure. No manual focus control? Try using the camera's landscape mode, which also sets the focus to infinity; the low-light environment will encourage the camera to shoot at a slow shutter speed by default.

If you can control the aperture setting on your point-and-shoot, dial in a low f/stop, somewhere between f/8 and f/16. That will help prevent overexposing the scene during the long exposure and avoid light "blooms" coming from the explosions in the sky.

And finally, choose a slow shutter speed--anywhere between 1 second and 16 seconds can work, depending upon the amount of ambient light and how many fireworks are in the sky. The longer your exposure, the more fireworks you'll capture at once, and the longer your light trails will be. So you might want to start with a shutter speed around 1 to 4 seconds and see if you like the results. For really long exposures, try covering the lens with your hand or the lens cap between bursts to avoid over-exposing the picture.

147633-fireworks_1_b

Digital SLR users have an easier time, or at least more options, in picking the right settings for fireworks. Throw the camera on full manual mode, preselect your lens's focal length (unless you're using a prime lens that has only one focal length, the aperture will change every time you adjust the focal length), dial in a low aperture opening, and pick a slow shutter speed. Most SLRs also have a "bulb" mode, which leaves the shutter open for as long as you hold down the shutter release. You can use it to take exposures as much as 30 seconds long. If you go for super-long exposures, you might want to cover the lens between fireworks.

Join the newsletter!

Or
Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Dave Johnson

PC World (US online)
Show Comments

Brand Post

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Andrew Teoh

Brother MFC-L9570CDW Multifunction Printer

Touch screen visibility and operation was great and easy to navigate. Each menu and sub-menu was in an understandable order and category

Louise Coady

Brother MFC-L9570CDW Multifunction Printer

The printer was convenient, produced clear and vibrant images and was very easy to use

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?