MIT, medical center find benefits with 802.11n deployments

3,200 access points running older 802.11a/b/g protocols will be replaced with 802.11n devices.

MIT in Cambridge, Mass., and a medical center based in Alabama are beginning to deploy faster wireless 802.11n access points from Cisco Systems, networking engineers said in a Webcast Tuesday.

At MIT, as many as 3,200 access points running older 802.11a/b/g protocols will be replaced with 802.11n devices in the 12 to 16 months in more than 100 buildings, said Chris Murphy, networking engineer at the university.

A rollout of the new gear began last Friday, so the university hasn't yet seen the full capability of the new network. However, high-definition video was transmitted across the 802.11n network with "good results," Murphy said in the Webcast, sponsored by Cisco Systems.

Murphy said MIT, with more than 10,000 students and 11,000 staff, has a "very, very wide variety" of client devices, from handhelds to laptops. Many of the laptops probably support the 802.11n protocol, he said. Some MIT staff have been using voice over IP wireless handsets and had experienced poor coverage with the older Wi-Fi technology, but said they had full signal strength within the range of the new 802.11n access points, he added.

With 802.11n, the university could eventually provide Internet Protocol television, which requires high bandwidth, Murphy said.

At the Southeast Alabama Medical Center, in Dothan, Ala., testing is underway on 802.11n hardware, and results have shown that it "doesn't make sense not to move forward" with the newer, faster technology, said networking engineer Scott Lapham in the Webcast. He said any new devices added to the network will be "n-ready."

During tests over Cisco's 802.11n gear, Lapham found that speeds were seven times faster with an 802.11n client communicating with an 802.11n access point, compared with an older 802.11a client communicating with an 802.11a access point. Speeds of much as 165Mbit/sec. were possible, he said.

Using 802.11n technology, Lapham said he was able to transmit a gigabyte of data in less than two minutes. Currently, the medical center, with 370 hospital beds, has about 450 access points on older protocols. Uses of the wireless network include 180 laptops used primarily for transmitting bedside patient data wirelessly. The hospital also support 100 voice-over-IP wireless phones and a range of medical devices.

One objective of having 802.11n technology in the medical center would be to support more users per access point, Lapham said. Cisco engineers said their gear is tested to support up to 200 client devices per radio in the access points, but each radio will give optimal support to 25 simultaneous users. Cisco said it is testing 802.11n gear using Intel client chips.

In some cases, Cisco tests the gear with laptops running 802.11n that are mounted to robots that move through an office-like setting while transmitting to access points.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Matt Hamblen

Computerworld
Show Comments

Cool Tech

SanDisk MicroSDXC™ for Nintendo® Switch™

Learn more >

Breitling Superocean Heritage Chronographe 44

Learn more >

Toys for Boys

Family Friendly

Panasonic 4K UHD Blu-Ray Player and Full HD Recorder with Netflix - UBT1GL-K

Learn more >

Stocking Stuffer

Razer DeathAdder Expert Ergonomic Gaming Mouse

Learn more >

Christmas Gift Guide

Click for more ›

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?