IBM tries to tackle nanotube chip cooling

IBM researchers are looking at ways to understand heat dissipation in carbon nanotubes.

IBM researchers on Monday said they are looking at ways to improve heat management in carbon nanotube transistors to prevent them from self-destructing.

The researchers have found ways to measure the temperatures of tiny carbon nanotubes, which was not previously possible, said Phaedon Avouris, IBM fellow and manager, nanoscale science and technology, at IBM Research.

Today's laptops and desktops use silicon chips that are being scaled down to smaller sizes to make them faster and more power efficient. To that end, more transistors are being bundled into chips, and the smaller a transistor, the better it performs. To create smaller transistors, chip developers are exploring the use of carbon nanotubes. Carbon nanotubes are cylinders made out of carbon atoms, with a diameter of 1 to 2 nanometers.

But carbon nanotubes need to be understood before being implemented, and heat dissipation is one of their limitations, Avouris said. Too many carbon nanotubes bunched together are difficult to cool by just blowing air through the circuits, he said. Excess heat lowers performance and eventually could cause the nanotubes to self-destruct.

"The first step is we want to understand how electrons flow through this material, as it is completely different from the way electrons flow through silicon," Avouris said. Carbon nanotubes based on materials such as graphene have unusual heating and dissipation mechanisms that could have wider implications for nanotechnology.

Heat is generated in carbon nanotubes by how quickly atoms vibrate. The faster the atoms vibrate, the more heat they generate, which is then dissipated to the substrate, which is the material that holds the nanotube in place. The scientists likened understanding the heating and dissipation of nanotubes to understanding heat dissipation in conventional silicon chips.

"That's what you care about in a computer. Not only how the individual devices heat up, but how the whole computer heats up. You take your laptop, put it on your lap, you eventually start burning your legs. That's the transfer of heat from the individual devices to the substrate of the computer, then to the chassis... on to your leg," Avouris said.

However, silicon and the newer carbon nanotubes work differently, so the researchers have to take a step back and understand the science of this new material, the researchers said.

The researchers examined efficient ways to transfer heat from the nanotubes to the substrate with the help of another carbon material that sits in between.

The findings are of fundamental scientific importance and crucial in the creation of thermal management systems that will regulate heat of future carbon nanotube-based devices, Avouris said.

This is initial research into understanding heat and cooling on carbon nanotubes, Avouris said. Many more steps are required in the research before any such devices could be commercially produced, but this is an extremely important step, he said.

"The understanding of how heat flows through specific nanotube devices will have important implications on the operation and integration of future carbon-based devices," Avouris said.

The researchers published their findings in a recent issue of Nature Nanotechnology.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags IBMresearch

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Agam Shah

IDG News Service
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?