Research could instantly wake shut-down laptops

Researchers aim to put new material on silicon that allows transistors to retain data even when power is turned off

Researchers have developed a technology that could allow laptops to wake up instantly from a shut-down state without draining battery life the way sleep states do.

University researchers have built ferroelectric material - commonly found on smartcards - on silicon, which could allow certain transistors to retain information after power is shut off.

Scientists from Pennsylvania State University, Cornell University and Northwestern University are involved in the research.

The new findings could save users time by instantly booting laptops to their state when they were shut down. For example, a transistor in the laptop will be able to retain the state of a Word document on shutdown, and instantly reload the same state on reboot.

"It would be instant-on, meaning as soon as the power comes back on, your computer would be in exactly the same state it was when you turned it off and ready for action," said Darrell Schlom, principal investigator and professor at the department of materials science and engineering at Pennsylvania State University.

Quick-boot capabilities are enabled in laptops and most mobile devices, but many are unable to recreate shutdown states.

Laptops usually never reboot back to their shutdown state, unless they are in sleep mode, which drains battery power. In essence, ferroelectric materials could wake up laptops from sleep mode, but without drawing any battery power.

The research could pave the way for a new generation of lower-power, higher-speed memory devices, Schlom said. For laptop users, it could reduce the time to load an OS from storage devices like hard drives. The ferroelectric material could also retain data in case power is lost.

The research revolves around building ferroelectric transistors - which can retain data in any electric state - on hybrid transistors. Ferroelectric materials are found in smartcards used today in subway, ATM and fuel cards.

The researchers took strontium titanate, a variant of the ferroelectric material used in smartcards, and deposited it on silicon, putting it in a state where it could retain information even when power is off. The new findings cut the intervening layers that made it difficult to put the material on silicon.

Typically when power is turned off, voltages disappear from transistors, which have to be recreated when power is turned on. To recreate them, the relevant information is loaded from nonvolatile storage mediums like hard drives, which takes time. The ferroelectric transistors retain magnetization when the electric field is turned off, allowing it to retain data.

The technology will load operating systems differently from existing memory technologies like DRAM and storage technologies like hard drives and solid-state drives, Schlom said. Ferroelectric transistors conceptually differ in the way data is loaded and retained, Schlom said.

Benefits of ferroelectric transistors were first realized in 1955 by scientists at Bell Labs, Schlom said. Though the recent findings are a major step ahead, additional research is needed to build an actual ferroelectric transistor to make instant-on computing a reality, Schlom said. He couldn't provide a timeline for when such transistors would be built.

The researchers also include scientists from the National Institute of Standards and Technology, Motorola and Intel. The research is funded by the National Science Foundation and the U.S. government.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags ferroelectricPower Managementnotebookslaptops

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Agam Shah

IDG News Service
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?