Elpida sees DRAM prices rising next year, lifts spending

Elpida raised its capital spending plan 67 per cent to US$1 billion

The global DRAM industry will see higher prices per chip next year than in the past three because the global recession has forced many chip makers to reduce spending on new factories, the head of Japan's Elpida Memory said Tuesday.

DRAM makers have for the most part been producing chips at a loss since the second half of 2007, after over-investment in new factories caused a chip glut and brought prices down. The price of mainstream DRAM chips hit bottom late last year at around $US0.50, far below the cost to make each chip. Weak pricing caused German DRAM maker Qimonda to file for bankruptcy early this year, and forced others to mothball factories and lay off workers.

Since then, the global recession has eased and demand for the main product DRAM is used in, PCs, has rebounded strongly. Mainstream DRAM prices now hover around $2.50 per chip, far better than before. The price remains near the cost of production, though, causing chip makers short on cash to remain cautious about new factory spending.

Fewer new factories means the supply of DRAM may not be sufficient to meet demand, said Yukio Sakamoto, CEO of Elpida, at a news conference in Taipei. That would push prices up and make DRAM manufacturing more profitable: "Next year the DRAM industry is going to be so much better," said Sakamoto.

But good news for DRAM makers translates into bad news for PC buyers.

Low DRAM prices have been a boon to PC buyers over the past few years, and sharply rising memory prices could increase the cost of PCs, or dent their performance. PC makers generally keep product prices as low as possible with low-priced components.

When DRAM prices are low, they can add more chips or technically better chips without raising the price of the PC. But when DRAM prices rise, PC vendors generally reduce the amount of DRAM inside to compensate for the price increase. If DRAM prices rise too quickly, PC vendors will have to find other ways to cut system costs, or pass the price increase along to consumers.

DRAM prices could rise further soon. Contract DRAM prices for the first half of December were flat for almost all densities and common types of DRAM, including DDR2 and DDR3 (double data rate, third generation), according to DRAMeXchange Technology, an online clearinghouse for the chips.

The company had anticipated up to a 10 percent drop for the period because of a sharp run up in prices during November and because PC production usually weakens in December as most shops are already stocked up ahead of holidays.

This year the weak season may come late because PC shipments remain strong, DRAMeXchange said in an e-mailed statement Tuesday. PC shipments in December may match November, the company said, resulting in strong support for DRAM prices. Prices may weaken in January this year, instead of December.

Elpida plans to catch the stronger DRAM market next year by investing more in new production lines. The company will spend a total of US$1 billion on new production lines, Sakamoto said. Around $600 million will be spent on Elpida's factories in Japan, and another $400 million will be spent on new machinery at its Taiwanese subsidiary, Rexchip Electronics.

Elpida had previously announced $600 million in capital spending.

The company will also transfer chip production technology as fine as 40 nanometers and even 35 nm to its new Taiwanese partner, ProMOS Technologies, so the company can produce DDR3 on behalf of Elpida. Chip technologies are usually described by the size in nanometers, or billionths of a meter, of the smallest feature that can be manufactured on a single chip.

Reducing the size of the features in DRAM typically increases chip speed and reduces power consumption, as well as lowering production costs as more chips can be made from each silicon wafer.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags Elpidadramstorageprice indexmemory

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Dan Nystedt

IDG News Service
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?