OCZ's hyperfast SSD with 3X SAS speed set to ship

The 3.5-in MLC-flash IBIS SSCD offers up to 960GB capacity and uses new OCZ High-Speed Data Link

OCZ is set to begin shipping later this month its first solid state drive (SSD) using a new proprietary interface that's said to be three times faster than serial-attached SCSI (SAS).

The new 3.5-in IBIS SSD is aimed at data centers and high-performance computing environments. It offers up to 740Gbit/sec throughput or 120,000 I/Os per second and uses lower-end multi-level cell (MLC) NAND flash, which OCZ said lets it keep the price tag within reason.

OCZ's IBIS SSD

The new IBIS drive will be available in capacities ranging from 160GB to 960GB and is expected to begin shipping to systems manufacturers in about two weeks, said Daryl Lang, director of product marketing at OCZ.

The IBIS drive will take advantage of OCZ's new High-Speed Data Link (HSDL) that's expected to boost I/O for solid-state drives (SSDs) in high-performance computing environments.

OCZ developed its standards-based HSDL interface because existing drive interconnects, such as SAS and serial ATA (SATA), quickly become saturated with I/O traffic when used in conjunction with high-performance SSD technology.

The HSDL protocol would be more than three times faster than 6Gbit/sec SAS and six times faster than today's 3Gbit/sec SATA II. While conventional hard disk drives can't even saturate 1.5Gbit/sec SATA, SSDs with up to 10 I/O channels are easily able to fill 3Gbit/sec pipes.

In contrast, HSDL is capable of running up to 20Gbit/sec of data bandwidth per channel.

The IBIS SSD achieves its high performance through the use of four SandForce 1222 controller chips . OCZ announced its shift away from the Indilinx Amigos to the Sandforce chips as part of the unveiling of its consumer-class, 2.5-in SSD, the Onyx 2 , which came out late last month.

OCZ will provide single port adaptor cards with the drives. It added that a quad-port card is available for multiple drive configurations needed by users seeking greater storage and bandwidth, Lang said.

While there is an industry trend toward using 2.5-in drives in data center servers, Lang said OCZ chose a 3.5-in casing for its SSD for two reasons: many of its customers are still using 3.5-in drives in their servers and workstations; and there simply wasn't enough room in a 2.5-in drive casing to fit all the IBIS SSD components inside.

"We're not planning a 2.5-in version at this time," Lang said in an e-mail exchange with Computerworld.

Lang said OCZ chose to use MLC NAND flash memory as another part of the effort to keep pricing reasonable. While SLC flash is preferred for use in high-end drives, he said there's a strong push by data center executives to cut costs. Many OCZ customers, in fact, many OCZ customers simply don't want to pay for SLC, he said, though "we can, of course, build SLC or eMLC [enterprise MLC] versions of the drives in the future," Lang said.

Enterprise MLC drives are those considered to have similar I/O handling capabilities and resiliency as SLC-based SSDs.

"It's important to understand the customer usage model. If it's database servers with heavy write patterns, then SLC is going to be required, but there are many times that MLC may be viable," Lang added. A number of MLC-based enterprise-class SSDs are emerging from multiple vendors, and are already becoming a popular alternative to many web-based applications that require high throughput.

For example, Israeli start-up Anobit Technologies in June released its first MLC-based SSD that targets enterprises. The Genesis SSD boasts read/write speeds of up to 220MB/sec and 180MB/sec, respectively. and more importantly can sustain more than 50,000 write/erase cycles, about half that of SLC-based SSDs.

STEC last month announced its MACH16 family of SSDs , which sport read speeds of up to 240MB/sec and write speeds of up to 190MB/sec.

Micron's Crucial C300 SSD , which also uses the Sandforce controller, uses MLC flash and a 6Gbit/sec SATA interface. The Crucial C300 has read speeds of up to 355MB/sec. and sequential write speeds of up to 215MB/sec. That is still less than half the speed OCZ's new IBIS SSD.

Micron's SLC-based P300 SSD , which the company claims is the fastest SATA drive, offers only 360MB/sec. read and 275MB/sec write speeds.

Micron's C300 retails for $715 for the 256GB capacity version. By comparison, OCZ's IBIS drive with 240GB will retail for $739. STEC did not release pricing for its drive.

OCZ's IBIS has a 2 million hour mean time between failures (MTBF) rating, but many industry observers do not believe MTBF is not the preferred method for measuring drive life as it refers to bulk shipments of drives and not individual units. The IBIS SSD will come with a three-year warranty.

Pricing for IBIS drives is based on capacity. A price list follows:

  • 960GB -- $2799
  • 720GB -- $2,149
  • 480GB -- $1,299
  • 360GB -- $1,099
  • 240GB -- $739
  • 160GB -- $629
  • 100GB -- $529

Join the newsletter!

Or

Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.

Tags storagestorage hardwarestorage softwareStorage Management

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Lucas Mearian

Computerworld (US)
Show Comments

Brand Post

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Emily Tyson

MSI GE63 Raider

If you’re looking to invest in your next work horse laptop for work or home use, you can’t go wrong with the MSI GE63.

Laura Johnston

MSI GS65 Stealth Thin

If you can afford the price tag, it is well worth the money. It out performs any other laptop I have tried for gaming, and the transportable design and incredible display also make it ideal for work.

Andrew Teoh

Brother MFC-L9570CDW Multifunction Printer

Touch screen visibility and operation was great and easy to navigate. Each menu and sub-menu was in an understandable order and category

Louise Coady

Brother MFC-L9570CDW Multifunction Printer

The printer was convenient, produced clear and vibrant images and was very easy to use

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?