Users face serious threat as hackers take aim at routers, embedded devices

Attacks are likely to continue and manufacturers are largely unprepared to respond, security researchers say

Home routers and other consumer embedded devices are plagued by basic vulnerabilities and can't be easily secured by non-technical users, which means they'll likely continue to be targeted in what has already become an increasing trend of mass attacks.

Computer OSes have advanced considerably from a security standpoint over the last decade, with their creators strengthening code and adding a variety of protections. However, routers, modems, wireless access points and other "plug-and-forget" devices have lagged behind as their makers lacked strong incentives to secure them. As a result, those devices can now pose a significant threat to the online security of users, contrary to the long-held belief that connecting a computer through a home router is better than exposing it directly to the Internet.

Routers and other embedded devices have simply not been on attackers' radar until now, at least not on a significantly large scale, but that's starting to change and if the attacks observed this year are any indication, it might be happening at a faster pace than manufacturers can react.

Because routers can affect all other local devices that access the Internet through them, they are a rich target, said Trey Ford, global security strategist at security firm Rapid7, via email. "Users expect a website to be authentic, and a compromised router (DSL router, gateway, wireless access point, cable modem -- take your pick) allows a malicious party to undermine that trust. The trend of connecting more devices to the Internet only means there is more for attackers to play with."

For instance, in early February incident responders from the Polish Computer Emergency Response Team warned that thousands of home routers in the country had their DNS settings hijacked by attackers in an attempt to intercept online banking connections. Later that month security researchers from the SANS Institute's Internet Storm Center (ISC) discovered a worm that was infecting Linksys E-Series routers and then in March Internet security research organization Team Cymru reported that a global attack campaign compromised 300,000 home and small-office wireless routers.

Other significant incidents this year include thousands of Asus routers exposing to the Internet the content of hard drives attached to them, Hikvision DVRs being infected with Bitcoin mining malware due to a default root password and exposed telnet service, and millions of home routers being exposed to DNS-based DDoS amplification abuse.

This year antivirus companies have also found malware binaries compiled for architectures commonly used on embedded devices like ARM, PPC, MIPS and MIPSEL or botnets that attempt to access routers using easy-to-guess credentials.

Carsten Eiram, the chief research officer at vulnerability intelligence firm Risk Based Security, believes that attackers have begun shifting focus from exploiting vulnerabilities in popular client applications to targeting routers because many software developers have stepped up their game by improving their code and adding security mechanisms to their programs.

"Embedded devices like home routers are an obvious choice [as new targets for attackers]," Eiram said via email. "They're used by 'everyone,' the code maturity from a security perspective is usually terrible, and they have no real security mechanisms in place, making exploitation easier."

Device manufacturers are far behind when it comes to secure programming, he said. "The vulnerabilities being found are often very basic issues straight out of the 1990's like buffer overflows and OS command injection. We've even seen reports of blatantly obvious back-door like 'features'."

Many vendors are also unprepared to deal with security issues and don't seem to have any real security program in place, either for the development process or for handling vulnerabilities reported to them, Eiram said.

The standard networking equipment provided by ISPs to their customers can increase the threat of large-scale attacks because any critical vulnerability discovered in such devices can result in millions of potential targets with uniform configurations that are easy to attack.

These vulnerabilities are not uncommon. On Tuesday a researcher released details about vulnerabilities found in the standard ADSL/Fiber Box devices supplied by French ISP SFR to its customers and in January, a different researcher found critical vulnerabilities in the standard EE BrightBox router supplied by U.K. ISP EE. SFR has a broadband customer base of 5.2 million, according to its website, and EE, a joint venture between Deutsche Telekom and Orange, claims that its fiber broadband service reaches 15 million U.K. households.

Ilia Kolochenko, the CEO of Geneva-based security firm High-Tech Bridge, believes it's not only manufacturers that are to blame for the poor security of routers. Many users are often the bigger problem because they don't even change the default admin password on their devices, leaving the door wide open for attackers, he said via email.

However, Kolochenko agreed that updating and configuring routers can prove difficult for non-technical people and thinks that ISPs should educate their customers about the importance of configuring their routers in a secure way, just like they advise them on securing their PCs.

"Right now, it would be good if people at least realized that their home routers should also be secured, as they are not just 'devices to plug-in and forget about'," he said. "Then they can hire IT consultants from their ISPs -- many offer telephone consulting and guidance for free -- or ask IT-savvy friends to check if their router is secure."

"The majority of installed embedded devices -- not just routers, but TVs, storage devices and anything else you place in that 'Internet of Things' bucket -- do not automatically update," Ford said. "This means they do not automatically install important security fixes that address issues like these."

Eiram believes that the absence of automatic updates is exactly the reason why embedded devices should have better code maturity and secure configurations from the beginning.

"To most home users, a router is that magical box in the corner, allowing them to go on the Internet," Eiram said. "Many are still struggling to update software on their computers that don't have auto-update features. Asking those users to log in and then configure or update their routers is not realistic."

For those users who do feel knowledgeable enough to configure their own routers, Eiram advises disabling access to the administration interface from the Internet, as that is usually the most commonly vulnerable feature.

"Ensuring other services are not remotely accessible is also a good idea, since we do see vulnerability reports in those as well," he said. "The problem here is that it is sometimes not even clear to users that a service is active and listening remotely. Finally, checking for updates regularly is important and usually possible from within the the web-based management interface."

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags securityprivacyNetworkingspywareLinksysonline safetyintrusionnetworking hardwareasusAccess control and authenticationExploits / vulnerabilities

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Lucian Constantin

IDG News Service
Show Comments

Cool Tech

Breitling Superocean Heritage Chronographe 44

Learn more >

SanDisk MicroSDXC™ for Nintendo® Switch™

Learn more >

Toys for Boys

Family Friendly

Panasonic 4K UHD Blu-Ray Player and Full HD Recorder with Netflix - UBT1GL-K

Learn more >

Stocking Stuffer

Razer DeathAdder Expert Ergonomic Gaming Mouse

Learn more >

Christmas Gift Guide

Click for more ›

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?