New robot bounces, could replace rovers on NASA missions

Researchers eye unique robots for missions a decade and more into the future

This prototype tensegrity robot developed by UC Berkeley can bounce, roll around by adjusting tension on cables.

This prototype tensegrity robot developed by UC Berkeley can bounce, roll around by adjusting tension on cables.

Researchers at NASA and the University of California at Berkeley are developing a robot that's robust enough to be dropped directly onto planets and go straight to work.

Current missions to Mars have been complex affairs, typically using parachutes to guide robots and their delicate scientific instruments down to the surface. In 2012, things got even more high-tech when the space agency used a hovering platform to lower the Mars Rover onto the planet.

In contrast, prototypes of the new robot resemble something a child might make in a craft class -- one was a mass of wires, control cables and Lego bricks -- but what it lacks in appearance it more than makes up for in physics.

(See video of the robot in action on IDG TV.)

The six rods and 24 cables that link them are under a mix of tension and compression make the device incredibly resilient to impacts.

"We've decided that these structures are so strong that they can actually withstand the landing at 30 miles an hour without any additional support," said Adrian Agogino, a scientist working at NASA Ames research center. "So no additional airbags, no additional landing support. This entire thing could actually land on Titan and then, as an active structure, could roll around like a rover."

Researchers have thought about using such so-called tensegrity structures for some time, but have lacked complex computer algorithms that can model how they work, but that's now available and the results are encouraging, said Agogino.

Being robust enough to survive a drop onto a planet also means the robots are plenty robust enough to roll around a planet's surface without getting into trouble.

They move by adjusting the tension in the cables, which has the effect of changing the shape of the robot so its balance shifts and it falls to one side.

Existing robots are very carefully controlled because one small mistake could literally halt a multi-million dollar research program.

"If you have a very robust robot, you don't have to care about that so much," said Agogino. "If it's robust enough that it just won't get into trouble, you just send it going. Maybe it hits a rock, maybe it hits some uneven terrain, you don't care. It's already survived a high-altitude landing, it has enough degrees of freedom to get itself out of trouble."

He envisages the complex scientific instruments being held at the center of the device and probes extending to the edge.

Should it all work, Agogino has an intriguing idea for what it might make possible,

"My fantasy, I don't know if it ever will be done, is you actually send two of these. One of them you have controlled by NASA operations, the other one you just have it controlled on the Internet. You have people tell it where to do and since it's structurally robust, people can make mistakes and give it bad commands but it should survive that. I'd like to see the return on the Internet scientists versus the NASA scientists."

There is still a lot of research that remains to be done in this project. NASA estimates it's at least a decade away from making it onto a mission.

Martyn Williams covers mobile telecoms, Silicon Valley and general technology breaking news for The IDG News Service. Follow Martyn on Twitter at @martyn_williams. Martyn's e-mail address is martyn_williams@idg.com

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags NASAroboticsUniversity of California at Berkeley

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Martyn Williams

IDG News Service
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?