5G starts with chips like IBM and Ericsson's silicon antenna

The thin, integrated 28GHz module should bring commercial networks closer to reality


										IDG Worldwide

IDG Worldwide

A piece of silicon less than three inches across may speed up the arrival of 5G mobile networks in the next few years.

IBM Research and Ericsson have developed a compact antenna array that can aim high-frequency radio signals at mobile devices and shoot them farther than they otherwise could reach, the companies said. Silicon integration makes it thin and energy efficient so it’s more commercially viable.

Carriers expect 5G networks to deliver cellular data speeds in the gigabits per second, far faster than what today’s LTE services offer. They also expect benefits like less power consumption, lower latency and the ability to serve a lot more devices at the same time.

But before they build those networks, the carriers will need equipment that’s not too expensive to turn a profit for them. IBM and Ericsson say the 64-antenna package they’re announcing on Tuesday pushes 5G a long way toward commercial reality.

In a two-year joint project, the IBM and Ericsson researchers packed key components of an antenna module, such as power amplifiers, into a single IC (integrated circuit). Then they combined four of those ICs, plus 64 solid-state silicon antennas, in a package that measures 2.8 inches (7cm) on each side.

The area of the module was dictated by physics, because the antennas can’t get any smaller. But integrating other components in an IC made the package slimmer, cooler and more efficient, said Hakan Andersson, 5G product manager at Ericsson.

Packages like this will go into small cellular base stations that use frequencies in the 28GHz band, one of several millimeter-wave bands that are expected to make 5G possible. Millimeter waves aren’t useful everywhere but are being considered for indoor spaces and crowded urban areas.

Such high-frequency signals normally can’t travel far, but emerging technologies like the part developed by IBM and Ericsson can focus those signals into beams and point them at users’ devices. They claim it’s the most precise system of its kind. It’s quick enough to follow devices being carried by users or moving in cars at highway speeds, the companies say.

5G smartphones and other mobile devices probably won’t get 64 antennas, but they may use beam-steering with a smaller number of antennas, Andersson said.

IBM and Ericsson’s antenna array can change direction in 200 microseconds or less, and it uses dual polarization to send signals in two directions at once, reaching more devices. But there are no moving parts in the system. It shifts the phase of each antenna electronically to change the direction of the signal, said Alberto Valdes-Garcia, IBM Research staff member and manager of the RF Circuits and Systems Group.

Until now, cellular networks have never used frequencies above 6GHz. Several higher bands, including ones around 24-27GHz, 38GHz, and 70GHz as well as 28GHz, have more available bandwidth than today’s lower frequency cellular bands. That means more capacity, so more devices can get faster service. The principles used in developing the new ICs can be applied to other millimeter-wave frequencies, Valdes-Garcia said.

The technology is being announced on Tuesday at the International Solid State Circuits Conference in San Francisco. The 28GHz packages are expected to be used in base stations that will go through trials later this year. Large-scale commercial deployment of 5G networks isn’t expected until 2020.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Stephen Lawson

IDG News Service
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?