Iomega plans 35G-byte removable storage in 2004

Iomega is planning to launch two removable magnetic-based storage formats in the first half of next year, one aimed at small and medium enterprises and the other at consumer users, company executives said Monday.

The first of the two to be launched, Removable Rigid Disk (RRD), will offer a capacity of 35G bytes per cartridge and is targeted primarily at small and medium enterprises, said Scott Sheehan, vice president of business development at Iomega, at a news conference in Tokyo. The cartridge contains the media platter and spindle motor parts of a hard disk while the drive includes the read/write head, eject mechanism and interface.

"We see potential for RRD in a number of areas, primarily as tape replacement in small and medium businesses where tape is currently used for backup and recovery," said Sheehan.

Chief competitors of the format will include DDS (Digital Data Storage), Travan and low-end DLT (Digital Linear Tape), according to Sheehan. He said RRD will offer potential users a number of advantages over those and other tape and optical disc-based backup formats because it will combine the speed and performance of a hard disk drive with the portability those competing products.

Provisional specifications issued by Iomega show an average data transfer rate of 18M Bps (bytes per second). That compares favorably to a rate of up to 3M Bps for DLT, 2M Bps for Travan and around 5.5M Bps for recordable DVD, according to Iomega. File access time is similarly fast at around 13 milliseconds.

"What this means to small system business users is that a typical 20G-byte back up will take 20 minutes instead of two hours," he said.

RRD is also bootable and Iomega has developed a system called "boot and run" that will make it possible to launch a system directly from a backup in the event of a system failure, said Sheehan.

"We will announce the product at Comdex," he said referring to the Comdex 2003 trade show that will take place in Las Vegas, Nevada, from Nov. 17. Iomega will demonstrate working prototypes of RRD at the show and interoperability with servers from Dell, Hewlett-Packard, IBM and NEC and backup software from Computer Associates, Veritas Software and Dantz Development.

Commercial availability of drives is scheduled for the first quarter of 2004 and Iomega expects to have products supporting USB (Universal Serial Bus), ATAPI, SCSI and Serial ATA interfaces, he said. Drives are projected to cost US$349 with each 35G-byte cartridge costing between $39 and $49, according to Sheehan.

The second of the two formats coming from the company in the first half of next year is Digital Capture Technology (DCT).

DCT disks are around 5 centimeters in diameter and look similar to the company's now defunct Pocket Zip, or Clik, disks but can hold much more data. First generation versions will have a capacity of 1.5G bytes compared to the 40M bytes of Pocket Zip. Drives will either be available for integration into products or, like the earlier Pocket Zip format, in a PC Card form factor that can be plugged into a personal computer or other device.

The system is targeted at use in digital consumer electronics and Iomega is already in discussion with a number of such companies, said Sheehan. He declined to reveal the identity of the companies although said possible products include digital camcorders, portable video players, portable music players and devices with PC Card slots such as televisions.

DCT will be launched at the Consumer Electronics Show, which is scheduled to take place in Las Vegas in January next year, and Iomega expects to commercially launch the format in the latter part of the second quarter. The PC Card drives are expected to cost around US$149 and disks will cost around $10 each, said Sheehan.

Iomega's roadmap for the technology calls for disk capacity to double within two years of launch and double again with two years after that, he said. The company is also looking at smaller form factors, such as Compact Flash, based on the same technology. As a minimum Iomega expects a CF version would have a capacity of 1G byte if commercialized, said Sheehan.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Martyn Williams

IDG News Service
Show Comments


James Cook University - Master of Data Science Online Course

Learn more >


Sansai 6-Outlet Power Board + 4-Port USB Charging Station

Learn more >



Back To Business Guide

Click for more ›

Brand Post

Most Popular Reviews

Latest Articles


PCW Evaluation Team

Andrew Teoh

Brother MFC-L9570CDW Multifunction Printer

Touch screen visibility and operation was great and easy to navigate. Each menu and sub-menu was in an understandable order and category

Louise Coady

Brother MFC-L9570CDW Multifunction Printer

The printer was convenient, produced clear and vibrant images and was very easy to use

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Featured Content

Product Launch Showcase

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?