Antec Skeleton

Antec's enclosure lets you do your testing without having to deal with panels and other nuisances. We give a blow-by-blow account of how it works.

Antec Skeleton
  • Antec Skeleton
  • Antec Skeleton
  • Antec Skeleton
  • Expert Rating

    Not yet rated

Pros

  • Makes testing components easier

Cons

  • HD audio connector too short

Bottom Line

Antec's Skeleton will make your life much easier when it comes time to swap stuff in or out, whether you're doing it because you need to pretest components prior to deployment in other equipment or just because you're tired of what you have.

Would you buy this?

  • Price

    $ 299.00 (AUD)

If you've ever been in the middle of a system build or component installation and thought to yourself, "I wish I could reach through the case but there's a panel in the way," then Antec may have a solution for you with its new — and very unconventional — Skeleton enclosure.

Antec's Skeleton is a frame with a removable drawer for components, a removable tray for the motherboard that sits atop the drawer and a honkin' big 250mm (9.84in!) fan sitting up on its head with tricolor LED lighting. Basically, it looks like a cross between an arch bridge and a skinned Terminator. While it does have a bottom (sort of), it has no true sides, no back, front or top panels — and, best of all, no solid intervening panels to block your access.

I test a lot of equipment. My hard drive testbed had pretty much reached the end of its lifespan, thanks to an older chip set (and the fact that I've misplaced both side panels). It was time to build a new platform, and I thought I'd give the Skeleton a try. Stuffing the Skeleton

Putting some meat on the bones of this Skeleton is beyond simple. Two thumbscrews hold the drawer in place. Loosen them (they won't fall out) and then slide the draw out of the frame. While that will give you access to the motherboard tray, you can remove the tray itself entirely by removing the three screws that hold it onto the drawer.

Thankfully, I encountered no sharp edges no matter where in the case I jammed my hands, but that doesn't mean you'll be able to fit your whole hand anywhere, especially if they're big, old ham hocks like mine. I was able to overlap my fingers at every point from anywhere inside so that made life relatively easy.

I selected an ASUS P5QL-E motherboard, which has six SATA ports, allowing me to take advantage of the Skeleton's six hard drive bays. Unfortunately, that didn't leave me any available ports for SATA optical drives or for the Skeleton's front-mounted eSATA port. I'm considering adding an Addonics 4-port eSATA card to the system for extra drive capacity.

Once the motherboard was in place, I decided to install the power supply unit (PSU) next. It's a good idea to install the power supply right after the motherboard, because once you've put the drives in place, it gets a little cramped in that drawer. There is a way around that: If necessary, you can route cables by turning the case over on one of its sides or its back, but it's easier when the front of the drawer is empty.

Antec, of course, recommends one of its Signature series models: the 650 or 850 (watts). These devices are 80 Plus Bronze certified PSUs, which means they adhere to more stringent voltage and power output levels than uncertified power supplies. That's why they're great for a system being used as a testbed. The Signature 860 retails from about $US213 to $272, so if your power requirements aren't critical, find yourself a nice sub-$100 PSU and save some money.

Antec doesn't recommend the newer PSUs with 120mm fans because of airflow problems with their internal fans, but the Skeleton will accommodate them and almost anything else, if you follow the directions.

A note: I found myself needing to add an extra power cable to the Signature 850 PSU (it has modular cables) so I could hook up a drive on the side panel as an afterthought. The plug-in module on the PSU was reachable but needed more effort than I was willing to expend, so I settled for an adapter cable attached to one of the existing lines. In general, as far as the Skeleton is concerned, it's a good idea to think twice so you'll only need to cable once.

Join the newsletter!

Or

Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.
Show Comments

Cool Tech

Bang and Olufsen Beosound Stage - Dolby Atmos Soundbar

Learn more >

Toys for Boys

Nakamichi Delta 100 3-Way Hi Fi Speaker System

Learn more >

Sony WF-1000XM3 Wireless Noise Cancelling Headphones

Learn more >

ASUS ROG, ACRONYM partner for Special Edition Zephyrus G14

Learn more >

Family Friendly

Philips Sonicare Diamond Clean 9000 Toothbrush

Learn more >

Mario Kart Live: Home Circuit for Nintendo Switch

Learn more >

Stocking Stuffer

SunnyBunny Snowflakes 20 LED Solar Powered Fairy String

Learn more >

Teac 7 inch Swivel Screen Portable DVD Player

Learn more >

Christmas Gift Guide

Click for more ›

Most Popular Reviews

Latest News Articles

Resources

PCW Evaluation Team

Tom Pope

Dynabook Portégé X30L-G

Ultimately this laptop has achieved everything I would hope for in a laptop for work, while fitting that into a form factor and weight that is remarkable.

Tom Sellers

MSI P65

This smart laptop was enjoyable to use and great to work on – creating content was super simple.

Lolita Wang

MSI GT76

It really doesn’t get more “gaming laptop” than this.

Jack Jeffries

MSI GS75

As the Maserati or BMW of laptops, it would fit perfectly in the hands of a professional needing firepower under the hood, sophistication and class on the surface, and gaming prowess (sports mode if you will) in between.

Taylor Carr

MSI PS63

The MSI PS63 is an amazing laptop and I would definitely consider buying one in the future.

Christopher Low

Brother RJ-4230B

This small mobile printer is exactly what I need for invoicing and other jobs such as sending fellow tradesman details or step-by-step instructions that I can easily print off from my phone or the Web.

Featured Content

Product Launch Showcase

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?