Antec Skeleton

Antec's enclosure lets you do your testing without having to deal with panels and other nuisances. We give a blow-by-blow account of how it works.

Antec Skeleton
  • Antec Skeleton
  • Antec Skeleton
  • Antec Skeleton
  • Expert Rating

    Not yet rated


  • Makes testing components easier


  • HD audio connector too short

Bottom Line

Antec's Skeleton will make your life much easier when it comes time to swap stuff in or out, whether you're doing it because you need to pretest components prior to deployment in other equipment or just because you're tired of what you have.

Would you buy this?

  • Price

    $ 299.00 (AUD)


There's room for four drives — two 3.5in and two 5.25in — inside the front of the drawer. Antec supplies four special screws for them, one for each drive. Following along with the manual, which you will need to download (PDF), each screw is placed in a particular screw hole in a drive.

When you slide a drive inside along its rails, those screws lock the drive into place by fitting into special holes in one of the four "paddle" latches that are built into the drawer. If you need to remove a drive, just push the latch and you can slide it out.

You can also mount the drives permanently by using regular drive screws. There are holes along the outside of the drawer that allow you to do that; however, you will need to remove the two small side panels to gain access to them. They're held in place by thumb latches and lift up and out of the bottom rail where tabs have helped keep them in place.

Although the Skeleton has four proper bays, it can also hold an additional four 3.5in. drives, each mounted in one of the four provided carriers. The carriers are equipped with two hooked tabs that fit into either of two pairs of slots on the top of each side panel.

If you've been keeping score, that's two 3.5in. hard drives and two 5.25in. optical drives inside the case plus four additional hard drives hung along its sides — and the enclosure is a mere 13.0 by 14.8 by 16.5 inches in size. Clean and quiet

With all that open area and a 250mm fan, you may be curious about how loud the Skeleton is. Well, you can barely hear it at all. A few years ago, Antec developed a trick for its 120mm (and larger) fans — if you spin them slower than the average 80mm or 90mm fans, the noise level is reduced. Cooling power stays the same because the fan blades are bigger and push more air through. As a result, you can sit right next to the Skeleton and really not notice anything in the average room.

This has another advantage: it keeps dust away. My house is a dust magnet, but this is like having a vacuum on top of the case. You can feel the air being sucked away from the motherboard if you put your hand beneath the fan. And with no screens or filters, there's nothing to clean every month.


The one problem I faced was with the Skeleton's front-panel audio cable. The HD audio connector was about an inch and half too short to reach the corresponding motherboard connector on the P5QL-E. The extra wiring added by the standard AC '97 connector piggybacked onto the cable did reach, but that means I was left with no front-panel HD sound availability.

Speaking of cables, the beauty of the Skeleton is the easy access provided by its removable drawer and lack of panels. If you tie-wrap anything from the motherboard to the frame you won't be able to remove the drawer without cutting the tie-wrap. Also, if you've installed any interface cards (audio, graphics, tuner, etc.) on the motherboard, you'll either need to remove them or disconnect the acrylic bar to which they attach at the back of the case if you want to slide the drawer out.

Join the newsletter!


Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.
Show Comments

Cool Tech

Bang and Olufsen Beosound Stage - Dolby Atmos Soundbar

Learn more >

Toys for Boys

Nakamichi Delta 100 3-Way Hi Fi Speaker System

Learn more >

Sony WF-1000XM3 Wireless Noise Cancelling Headphones

Learn more >

ASUS ROG, ACRONYM partner for Special Edition Zephyrus G14

Learn more >

Family Friendly

Mario Kart Live: Home Circuit for Nintendo Switch

Learn more >

Philips Sonicare Diamond Clean 9000 Toothbrush

Learn more >

Stocking Stuffer

Teac 7 inch Swivel Screen Portable DVD Player

Learn more >

SunnyBunny Snowflakes 20 LED Solar Powered Fairy String

Learn more >

Christmas Gift Guide

Click for more ›

Most Popular Reviews

Latest News Articles


PCW Evaluation Team

Tom Pope

Dynabook Portégé X30L-G

Ultimately this laptop has achieved everything I would hope for in a laptop for work, while fitting that into a form factor and weight that is remarkable.

Tom Sellers


This smart laptop was enjoyable to use and great to work on – creating content was super simple.

Lolita Wang


It really doesn’t get more “gaming laptop” than this.

Jack Jeffries


As the Maserati or BMW of laptops, it would fit perfectly in the hands of a professional needing firepower under the hood, sophistication and class on the surface, and gaming prowess (sports mode if you will) in between.

Taylor Carr


The MSI PS63 is an amazing laptop and I would definitely consider buying one in the future.

Christopher Low

Brother RJ-4230B

This small mobile printer is exactly what I need for invoicing and other jobs such as sending fellow tradesman details or step-by-step instructions that I can easily print off from my phone or the Web.

Featured Content

Product Launch Showcase

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?